Skip to main content

How To Kill Grass Between Your Pavers


When your pavers are laid with gaps between them, you might find that grass decides to crop up every now and then. Not only does this detract from the appearance of your patio or pathway, it can attract bugs and other creatures who like to nibble on it. Pulling the grass out is only a temporary fix, as you need to kill the roots; these tips are sure to help you do just that.
  • Fill a spray bottle with some white vinegar and use it to generously coat the grass between your natural stone pavers. If you do this when the sun is shining directly onto the pavers, you will see the grass start to shrivel instantly. 
  • Pour some bleach into the gaps between your pavers or fill a spray bottle with the chemical and use it generously. Just watch that the bleach doesn’t run off and kill other plants that you have growing nearby. 
  • Mix together a chemical weed and grass killer according to the manufacturer’s instructions. Then, spray the solution directly onto the grass between the pavers. 
  • Once the grass begins to die, you can put on a pair of gardening gloves and begin pulling the growths out from between the paver. Make sure that you dispose of the grass properly.
Killing grass that has decided to grow between your pavers is actually quite a simple process; using one of the above methods over just pulling the grass out will also be a more long-term solution. Just beware using chemicals on your patio or walkway, especially if you have plants growing quite close to the stones that you do not want to kill.
Labels:
Location: Australia

Comments

  1. Anonymous27 May 2022 at 07:29

    What can I use on the grass between the pavers to ensure the safety of my cat and dog?

    ReplyDelete

Post a Comment

Popular posts from this blog

How To Remove The Sealant From Your Pavers

Most homeowners understand that when pavers are used outdoors they need to seal them in order to protect them from the affects of weathering and other damage. If you are inexperienced with sealing stone, however, it can be very easy to make mistakes that leave a visible layer on top of your pavers. You will need to remove this and start over again. Step 1: Apply a generous layer of paint stripper to a small section of the pavers using a pump sprayer. If you want, test the solution on an inconspicuous area to make sure that it is safe. Step 2: Leave the stripper to sit for about three minutes so that it can begin to eat through the sealant. You should begin to notice the coating slowly returning to its liquid state. Step 3: Take an old rag and use it to wipe away the dissolved sealant and the paint stripper. Make sure that you throw the rag away, as the stripper is full of toxic chemicals. Step 4: Rinse your pavers with running water (the garden hose works great) to re...
2 comments
Read more

How To Clean A Travertine Backsplash

When it comes to choosing a natural stone for your kitchen’s backsplash, one of the more popular tiling options is travertine. Not only is this stone incredibly attractive and able to blend with most decors, it is extremely resistant to staining. This makes it the perfect option for the kitchen, where cooking mishaps and mess are part of the norm. But how do you keep your travertine looking as good as new? Step 1: In a spray bottle, mix together 2 cups of water and 2 squirts of household dishwashing detergent. Then, add in half a cup of baking soda, put the lid on and shake to ensure that all of the ingredients are combined. Step 2: Spray the solution onto the travertine backsplash, then wipe the tiles clean using a damp cloth. This solution is safe to use whenever you need to clean the backsplash. Step 3: For stubborn stains, mix together baking soda and some water. Stir the ingredients until a thick paste has formed, making sure that you have prepared enough to co...
1 comment
Read more

How Do You Cut Bluestone?

When laying bluestone pavers or tiles in your home, you may come across situations when you need to cut them in order to get the perfect fit. Cutting through natural stone, however, can be a difficult task, as the tiles are prone to splitting and chipping with even the slightest pressure. Use these instructions to ensure you get a professional finish with your stone: Step 1: Measure where you will need to make cuts on your bluestone tiles and mark out these lines on the face of the tiles using a metal square and a white crayon. Measure twice to avoid mistakes. Step 2: Set up the power cutter that you have rented from your local hardware store. Place a piece of scrap wood on the bed so that, once the blade has gone through the stone, it will go into the wood and not the bed of the cutter. Make sure that the water reservoir is filled. Step 3: Place the bluestone tile on top of the piece of wood. Then, set the cutter’s blade so that it will make an incision between a quarter a...
Post a Comment
Read more