Skip to main content

How To Seal A Travertine Shower Stall

Travertine is one of the most aesthetically pleasing natural stones on the market, which is why a large number of homeowners have decided to use it to clad their shower stalls. As it is quite a porous stone and is prone to etching, however, it is important that you ensure your travertine has been properly sealed before deciding to take a shower.

Step 1: Look over your tiles to spot where any holes may be lurking. These occur naturally in travertine, but can make sealing the stone a little difficult. Mix together an appropriate epoxy and brush it into the gaps; leave to dry and apply a second coat.

Step 2: Mix together the travertine sealant you have picked up (according to the manufacturer’s directions) and begin applying it to the tiles using the accompanying applicator or a microfiber cloth. Wait 15 minutes so that the sealant begins to dry and use a dry cloth to buff away excess sealant.

Step 3: Once the coat has completely dried, you can begin applying the second layer. Make sure that you follow the directions outlined in the above step and remember to buff away the excess sealant.

Step 4: Leave the travertine tiles shower stall to dry completely for between 48 and 72 hours. During this time, the tiles should not be touched and you should not attempt to have a shower. Once a few days have passed, you can begin showering as per usual.

After you have sealed the travertine used in your shower stall it is important that you re-seal the tiles at least once a year to ensure that they remain protected against water, shampoo and other chemicals in your bathroom. Even so, you should avoid using products that contain citrus or abrasive components anywhere near travertine just to be safe.
Labels:

Comments

  1. Unknown12 December 2013 at 23:11

    This is what I needed! Thank you! How does your shower look? Good, I hope. I'll have to try it, but with a bucket. No hand-held shower head...Thanks......
    shower filter :p

    ReplyDelete

Post a Comment

Popular posts from this blog

How Do You Cut Bluestone?

When laying bluestone pavers or tiles in your home, you may come across situations when you need to cut them in order to get the perfect fit. Cutting through natural stone, however, can be a difficult task, as the tiles are prone to splitting and chipping with even the slightest pressure. Use these instructions to ensure you get a professional finish with your stone: Step 1: Measure where you will need to make cuts on your bluestone tiles and mark out these lines on the face of the tiles using a metal square and a white crayon. Measure twice to avoid mistakes. Step 2: Set up the power cutter that you have rented from your local hardware store. Place a piece of scrap wood on the bed so that, once the blade has gone through the stone, it will go into the wood and not the bed of the cutter. Make sure that the water reservoir is filled. Step 3: Place the bluestone tile on top of the piece of wood. Then, set the cutter’s blade so that it will make an incision between a quarter a...
Post a Comment
Read more

How To Clean A Travertine Backsplash

When it comes to choosing a natural stone for your kitchen’s backsplash, one of the more popular tiling options is travertine. Not only is this stone incredibly attractive and able to blend with most decors, it is extremely resistant to staining. This makes it the perfect option for the kitchen, where cooking mishaps and mess are part of the norm. But how do you keep your travertine looking as good as new? Step 1: In a spray bottle, mix together 2 cups of water and 2 squirts of household dishwashing detergent. Then, add in half a cup of baking soda, put the lid on and shake to ensure that all of the ingredients are combined. Step 2: Spray the solution onto the travertine backsplash, then wipe the tiles clean using a damp cloth. This solution is safe to use whenever you need to clean the backsplash. Step 3: For stubborn stains, mix together baking soda and some water. Stir the ingredients until a thick paste has formed, making sure that you have prepared enough to co...
1 comment
Read more

How To Remove Burn Marks From Granite

When granite is used as a bench top material in the kitchen it can sustain serious burn marks if hot pots are left on the surface, and when used as a vanity top in the bathroom a curling iron that has been left on can have a similar effect. If you have been unfortunate enough to notice burn marks on the surface of your granite, you will probably be interested in how you can go about removing them. Step 1: Wet the area of the granite that has sustained the burn mark using some clean, cold water. Then, using a very fine grade of sandpaper, begin sanding the mark off. Make sure that you use a gentle, circular motion to avoid causing further damage. Step 2: Wipe the area down with a soft, damp cloth to remove any debris. Then, using an even finer grade of sandpaper, continue to sand the granite. Again, be sure to only use a gentle, circular motion. Step 3: Rinse the area with cold water and dry thoroughly with a clean cloth. If you are satisfied that the burn mark has been rem...
1 comment
Read more